Maybe right now you already change your PLDTWIFI password and SSID.
But you can not remove or customize your WiFi SSID properly.
Most of PLDT user always have this SSID format PLDTMyDSL_NAME or PLDTHOMEDSL_NAME.
Because of that, now all your neighbors knows that you have PLDT connection hahaha.
Maybe your thinking how to remove that PLDT on your WiFi connection.
On this post I will teach you how to customize your PLDT SSID WiFi.
sample 192.168.1.1
login as
user: adminpldt
Password: 1234567890
Find Wireless - Guest/ Virtual Access Point
Select and click the checkbox Change the SSID Name wl0_guest example here is Blogmytuts. then click save/apply wait a few seconds.
SAGEMCOM MODEL:
In case you have old modem ( PROLINK ,Baudtec, FiDA )this are name as VAP0 to VAP3
select network authentication WPA2 -PSK , Key. Encryption AES or TKIP or chose both.
Type your WiFi password on the passphrase or Pre -shared
Click apply/save
Other Modem :
Go back to Basic Setup click WLAN click check box "Hide Access Point"
Click apply/save , then wait a few seconds to take effect.
Now, try to scan if your setup is effective.
For Prolink , Fida, and BauTec GUI go to Advance Disable SSID Broadcast , click Apply and Save.
Congrats! Hindi na kalat na may PLDT connection kayo :p
But you can not remove or customize your WiFi SSID properly.
Most of PLDT user always have this SSID format PLDTMyDSL_NAME or PLDTHOMEDSL_NAME.
Because of that, now all your neighbors knows that you have PLDT connection hahaha.
Maybe your thinking how to remove that PLDT on your WiFi connection.
On this post I will teach you how to customize your PLDT SSID WiFi.
1. Login as Admin
Open browser type your PLDT Gateway IP addresssample 192.168.1.1
login as
user: adminpldt
Password: 1234567890
2. Create a Virtual AP
Click on Basic Setup Menu , and then click WLANFind Wireless - Guest/ Virtual Access Point
Select and click the checkbox Change the SSID Name wl0_guest example here is Blogmytuts. then click save/apply wait a few seconds.
SAGEMCOM MODEL:
In case you have old modem ( PROLINK ,Baudtec, FiDA )this are name as VAP0 to VAP3
3. Create or Change Password
Go to Security menu, select your SSID sample Blogmytuts.select network authentication WPA2 -PSK , Key. Encryption AES or TKIP or chose both.
Type your WiFi password on the passphrase or Pre -shared
Click apply/save
Other Modem :
4. Hide the Default SSID
Notice you have 2 Access Point or SSID now we have to hide the default PLDTHOMEDSL SSID.Go back to Basic Setup click WLAN click check box "Hide Access Point"
Click apply/save , then wait a few seconds to take effect.
Now, try to scan if your setup is effective.
For Prolink , Fida, and BauTec GUI go to Advance Disable SSID Broadcast , click Apply and Save.
Congrats! Hindi na kalat na may PLDT connection kayo :p